A wall-mounted fan is an oscillating, compact fan mounted on the wall instead of the ceiling for air circulation. Such fans are ideal for small spaces like studios, kitchens, restrooms, hallways, etc. A ceiling fan requires a minimum distance of 8ft between the ceiling and the floor. However, small spaces become cluttered in the summer season, and air circulation becomes essential in such conditions. Mounting a fan on the wall becomes an easy option for the users.
In this blog, we will discuss how to fix wall-mounted fans and more about these fans.
Before you install a wall-mounted fan, you'll need to decide the location of installation. Before starting the installation process, you must check the child's safety, airflow, and visual appeal. Once you choose the location, you can mark the area with a pen or pencil. Your fan should be located near a power outlet so that turning it on and off is easy.
Let’s look at the fan installation process and how to fix a wall-mounted fan.
Installing a wall-mounted fan is easy, and you can do it yourself. But to install, you must have some technical knowledge and skills in electrical connection. Read the below-mentioned steps if you want the wall-mounted fan installation process an easy one for you:
Find the Right Place: You must decide where to install the wall-mounted fan. If it is for office use, look for a place on your side instead of the back or front of your sitting position. A person can unknowingly block the airflow by standing between the fan and you, so be thoughtful about it.
Install the Mounting Plates: You need an electric drill to start the work. You can get it from any local hardware store (if you don't have that). You can find a suitable installation place in your office or home with a stud finder. In the case of concrete walls, you must do a specific type of drill to make fine holes. Once the hole is done, you can start mounting and installing the plates.
Check the Mounts: Mounts will bear the entire fan weight; hence, you must double-check that they are correctly installed. You can apply a little pressure on the mount to check their fitting. If they are tight, you are good to go!
Installation of Front and Rear Fan Grills: Open your brand-new fan and remove all the plastic wrappers. Install the rear fan grill and hold it in place with the included screws. Ensure that the bolt is fastened at the desired height. Don't fasten the screws too tight, as they may get damaged. Once the screws are fastened, you can install the fan blades and fasten it. Now, the final work is to install the front fan grill.
Mount the Fan: Before mounting the fan, it is recommended to check its functioning with the nearest power supply to ensure it works as expected. Once everything is checked, you can mount the wall fan and test it finally by starting with the low speed. If it is not shaking at that place, try with high speed.
Connecting Wires: You can connect the wires of wall mount fans at the nearest power outlet or inside the wall so that no wires are visible outside.
You may want to know how to fix a wall-mounted fan, but repairing it depends on the type of issue they are facing. Below are some of the general troubleshooting steps to repair the common problem.
Check Power Supply: Ensure proper connection of the power supply, and if your fan is operated through a remote control, you must check the batteries.
Check Circuit Breaker: Check the condition of the fuse. Change it in case it is tripped.
Inspect the Blades: Check for any visible damage in the blades, and clean them if they appear dusty.
Motor Issues: If the fan is making noise, it may be an issue with the motor. Lubricate the motor with a few oil drops on the bearings.
Check Control: Check the fan's control panel and ensure the buttons and switches function properly.
Wobbling Issue: If your fan wobbles, you must ensure it is mounted securely.
Capacity Check: If your fan is stuck at a particular speed, you must change the capacitor.
Wiring Issue: Inspect the wire and repair or replace it in case of damage.
You can also check some videos on how to fix wall-mounted fans to learn more about the fixing process.
Wall-mounted fans are an excellent option for compact space. Look for features like air delivery, efficiency, and fan performance while buying one for your home or office. You can also go with BLDC (Brushless Direct Current) motor wall-mounted fans, which are highly energy efficient to save on electricity bills. You must also know the basic steps regarding how to fix wall mounted fan to ensure proper functioning of the fan.
Enhance your home with the beautiful ceiling and wall-mounted fans from Atomberg!
What should I do if my wall-mounted fan oscillation feature is not working?
Check your power supply, outlet, and power cord to ensure that there is no loose connection. If everything looks OK, you can contact a professional to fix it.
Try with different batteries.
Check for any obstruction between the wall-mounted fan and the remote.
How do I fix a wall-mounted fan not responding to the remote control?
Below are two basic steps regarding how to fix wall mounted fan.
Even after doing this, you can contact the professional if your fan is not working.
Can I fix a broken fan blade, or do I need to replace it?
You can fix the broken blade with a suitable adhesive if the break is like a minor crack. However, if the blade is corroded or broken, you need to buy a new fan blade.
BLDC Ceiling Fans | Mixer Grinder | Pedestal Fans | Wall Mounted Fans | Exhaust Fans | Smart Lock | Smart Cooling Fans | Designer Fans | Small Fans | Which Wall Fan is Best | What is a Wall Fan
