The main functionality of an exhaust fan in the kitchen or bathroom is to prevent moulds and protect your walls. Exhaust fans keep the moisture away from the room and maintain a clean and comfortable environment. Also, there are many exhaust fans available today, which are highly energy-efficient and easy to clean and install. While buying the exhaust fan, you can look for BLDC (Brushless direct current) motor exhaust fans to save on your electricity bills.
Hence you must think about the energy-efficiency factor while installing an exhaust fan in your kitchen or bathroom. Today, we will discuss the installation of exhaust fans and everything about it.
There are a few factors to be kept in mind while purchasing any exhaust fan for the bathroom or kitchen.
Size: Cubic feet per minute (CFM) determines the ability of the exhaust fan to move air. Usually, the smaller exhaust fans have less CFM and are ideal for small kitchens or bathrooms.
Air delivery: It is all about the ability of an exhaust fan to push stale air out of the bathroom. You must pick the exhaust fan with greater air delivery for efficient ventilation in the room.
Energy efficiency: Today, many exhaust fans come with BLDC motors. It implies they are more energy efficient as compared to traditional motors.
You will need below-mentioned tools to install an exhaust fan:
Power drill
Screwdriver
Foil duct tape
Jigsaw
Pencil
Framing square
Combination Pliers
You must ensure to gather all such tools if you are going to install the exhaust fan by yourself.
Below are some of the preventive measures which you might consider while installing an exhaust fan in the kitchen or at any other place.
Before installation, check for any obstruction within 2.5m to 3m opposite the air outlet.
You must check for the fan's stability while installing it. Adjust the fan to make it stable, and the fan should not tilt after installation. Adjust the bolt motor.
After installation, check the fan blades; they should be tight. If the fan is making any buzzing noise, then turn it off and switch it on after repair.
Installing an exhaust fan requires a little bit of technical knowledge, and by following some simple steps you can do this work by yourself. Below are some steps to follow to install an exhaust fan in your kitchen or bathroom.
It would help if you found out the right-sized fan for your bathroom or kitchen. The fan size will depend on the exhaust fan and your bathroom or kitchen area. Measure your kitchen size and do some research work to know the ideal fan size. Also, you must find out the ideal location of the fan as per your room size.
The next step is to cut a hole as per the size of your exhaust fan. It involves 3 steps:
Insert roof nails in the drywall to mark the location.
Outline the nail’s location with a pencil.
Cut it out with a drilling hole and saw.
The next step is to screw the fan with the joist. Join a 4-inch 90° duct elbow to the side outlet port. You must use foil duct tape to attach the fan to the port. Use a cable connector on the fan’s housing side. The four metal brackets should be installed into the vent fan’s side tabs. Now, place the vent fan in between the joists.
Now, bring the brackets in contact with the joists by extending them. Fix them with drywall screws. Join the connector with electrical cables and tighten them with a connector screw.
Once the fan placement is verified, attach the fan with the flexible ducting and the vent. Ensure the smooth running of fan blades. After the fitting process is completed, verify that the fan is working properly without any noise.
To test the functionality of your exhaust fan, take a printer paper, turn on the exhaust fan, and put the paper on your palm close to the fan. If your fan is working properly, it will suck the paper and hold it there. It is the simplest way to check your exhaust fan working.
Installing a bathroom exhaust fan keeps the bacteria and mould away from your home. With the advancement in technology, many customers are now looking for BLDC motor exhaust fans as they are highly energy-efficient.
While installing the exhaust fans, you must ensure to follow all the guidelines properly, or you can get help from the professionals for this work. Test your exhaust fan after installation to ensure smooth working.
Can I install an exhaust fan by myself?
Installing an exhaust fan is an easy task for many customers, but if you are not technically savvy, then you can hire a professional to get the work done.
What is the proper method for installing an exhaust fan?
Firstly, you need to find a suitable place to install bathroom exhaust fans or kitchen exhaust fans. Once done, you need to cut the hole properly as per the fan size. After completion of these two methods, you can go ahead with the fitting procedure.
How much does it typically cost to install an exhaust fan?
The price of an exhaust fan lies between Rs. 1500-Rs. 2500. You can save further by completing the installation process yourself.
Can an exhaust fan be installed in an air-conditioned room?
The functionality of an exhaust fan is to keep the bad and polluted air outside and supply fresh air inside the room. It is recommended to install an exhaust fan in air-conditioned rooms to change the air in the room and bring enough oxygen inside.
Does the exhaust fan require ducting for installation?
In case of new installation, you will require ducting, so you must ensure its size during installation. Also, look for the shortest and straightest ducting, if possible, to get the optimum level of performance for the exhaust fan.
BLDC Ceiling Fans | Mixer Grinder | Pedestal Fans | Wall Hanging Fans | Exhaust Fans | Fan Accessories | Smart Lock | Smart Cooling Fans | Sleek Fans | Underlight Fans | Designer Fans | Premium Fans | Large Fans | Small Fans | All Fans | Classic Fans | Regulator-Based Fans | What Are Exhaust Fan Motors? | Importance of Exhaust Fans in Bathrooms | Types of Exhaust Fans | How to Clean Your Exhaust Fan
